No power? Call 083 383 1966Same-day callout across the Helderberg
Electrical & Solar Specialist logo
Advice & Guides

Electrical safety · Somerset West

Why Does My DB Board Keep Tripping? A Somerset West Electrician Explains

If your DB board (distribution board) keeps tripping, it's usually doing its job: protecting you from a fault somewhere in your electrical system. A trip isn't the problem itself — it's the warning. Here's how to work out what's causing it, and when you need an electrician.

Distribution board with labelled circuits and protective switches
Your distribution board's protective devices help keep your electrical installation safe.

What your DB board actually does

Your DB board is the panel of switches that controls the electricity in your home. The main switch lets you isolate the supply; circuit breakers protect against overloads and short circuits, while the earth leakage unit detects current leaking where it shouldn't. These protective devices disconnect power when they detect certain faults, helping reduce the risk of fire or electric shock. They do not protect against every possible hazard.

The most common causes

1. A faulty appliance. A kettle, geyser, pool pump, washing machine or old heater with a fault can trip the board when it switches on. Often the earth leakage switch is the one that goes.

2. An overloaded circuit. Too many high-power appliances on one circuit at the same time — heaters, kettle, microwave — can overload it and trip the breaker. Common in winter.

3. Earth leakage (moisture or a wiring fault). Rain getting into an outside plug, a faulty geyser element, or damaged wiring can cause current to leak to earth. The earth leakage unit trips to protect you. This one is worth taking seriously.

4. An old or faulty DB board. Older boards and worn breakers can start tripping for no obvious reason. Sometimes the breaker itself is faulty. Proper testing is needed to find the cause.

How to find the culprit yourself (safely)

Only make simple checks if the board, plugs and surrounding area are dry and undamaged, with no burning smell, heat, sparks or exposed wiring. If you are unsure, stop and call an electrician.

  1. Unplug portable appliances on the affected circuit, using only accessible, undamaged plugs. Do not disconnect wiring or fixed appliances such as a geyser.
  2. Try resetting the tripped switch once using only its normal external handle. Never remove the cover.
  3. If it stays on, the fault may be appliance-related. Leave any suspected faulty appliance unplugged and have it checked. Do not deliberately reconnect a suspect appliance to make the board trip again.
  4. If it trips again with portable appliances unplugged, a fixed appliance, wiring fault or the board itself may be responsible — stop here and call an electrician.

Never force a switch that won't stay up, bypass a protective device, repeatedly reset it, or open or poke around inside the DB board yourself.

When is it dangerous — and when should I call an electrician?

Call a qualified electrician if:

  • The board trips repeatedly even with portable appliances unplugged.
  • The earth leakage keeps tripping — don't ignore it.
  • You smell burning, see scorch marks, or notice heat at the board or plugs. Do not touch them to check.
  • The board is old and tripping has become frequent.

These can point to a wiring fault, a failing board or an earth leakage problem — all of which need proper testing and repair.

If there is smoke, fire, sparking or a shock: keep people away, do not touch the board or affected equipment, and contact emergency services where needed. Never use water on an electrical fire.

How to prevent it

  • Avoid running too many high-power appliances on one circuit at the same time. Different sockets may still share a circuit.
  • Have your DB board and earth leakage tested by an electrician if the installation is older, its condition is uncertain, or tripping becomes frequent.
  • Fix or replace faulty appliances rather than living with a board that trips.
  • If you're buying or selling, an electrical COC inspection can identify compliance defects before transfer. An intermittent appliance fault may need separate investigation.

Frequently asked questions

Is it safe to just keep resetting the switch?

No. If it keeps tripping, it's warning you about a fault. Resetting does not itself bypass the protective device, but repeatedly re-energising a faulty circuit can expose you to fire or shock risks. Leave it off and have the fault checked.

Why does it only trip when it rains?

Moisture getting into an outside plug, fitting or damaged wiring is a possible cause of earth leakage. It needs to be traced and repaired by an electrician. Do not handle wet electrical equipment or try to seal it yourself while it is energised.

Can an old DB board be upgraded?

Yes. An electrician can assess whether upgrading or replacing an old board is appropriate. Correctly designed, installed and tested protection can improve safety, especially in older Helderberg homes.

My earth leakage keeps tripping — is that serious?

Potentially, yes. The earth leakage unit helps protect against electric shock, so persistent tripping should be checked by an electrician. Never bypass it.

DB board still tripping?

Contact Marius to discuss the problem and arrange an electrical check.